Permits to Work

Permit Control facility

All work, other than defined routine work, undertaken for Port Taranaki in designated areas must be done under permit.

 

Permit applications are handled by the Permit System Co-ordinator located in the Permit Control Facility.

 

  • The permit control facility is based on the lower floor of the HSE building on Hutchen place.
  • Office hours are 0700 - 1130 and 1230 - 1600 Monday to Friday - Phone 06 759 9733
  • After hours and on weekends permits are authorised by the NKTT Duty Supervisors - Phone 06 751 0200 extension 2
  • People who require a permit at Port Taranaki need to hold;
    •  Unit Standard 17588 - Apply for and receive a permit to work
    • Taranaki Passport Unit Standard 497 “ Demonstrate knowledge of workplace H&S requirements” and Unit Standard 17593 “ Apply safe work practices in the workplace”
    • Hazard ID Unit Standard 17602 “ Apply hazard identification and risk assessment procedures in the workplace.”
  • All persons carrying out work by permit must complete a Port Taranaki induction
  • The provision of necessary personal protective safety equipment is the responsibility of the permit holder.

All permitting requirement should be discussed with the PTL Permit Coordinator.

Further information on Port Taranaki's occupational health and safety requirements can be obtained from the HSE building on Hutchen place.

  • Health and safety
  • Access security
  • Permit to work
  • Oil transfer permit

Contact Us

  •   Port Taranaki Limited
        Port Taranaki Centre
        2-8 Bayly Road
        PO Box 348
        New Plymouth 4340
        New Zealand
  •   +64 6 7510200
  •   +64 6 7510886
  •   info@porttaranaki.co.nz

Contact Form

By submitting this form, you accept the Mollom privacy policy.

About Port Taranaki

Port Taranaki is centrally located on the west coast of the North Island and is one of New Zealand 's key import and export ports.

Read more